D-Ring Backing Plate 10pk

The D-Ring Backing Plate 10pk from ALLSTAR PERFORMANCE is an essential hardware component for securing trailer tie-down systems, cargo management, and vehicle load anchoring applications. Whether you're building a custom trailer, reinforcing recovery points on a truck bed, or installing aftermarket tie-down equipment, this 10-pack provides the structural foundation needed for safe, reliable load securement. Fabricators, restoration shops, and serious off-road enthusiasts rely on properly engineered backing plates to distribute concentrated forces across panel surfaces and prevent pull-through failures during towing or dynamic load conditions.

Each D-Ring backing plate is machined from solid steel and finished in natural (bare) steel, delivering 1/4-inch thickness that resists bending and permanent deformation under heavy tensile loads. The 1/4-inch gauge provides the critical mass required to support D-ring anchor points without flexing, ensuring that bolt preload remains consistent and that shear forces are properly distributed across the mounting interface. This thickness standard is engineered for both static applications—like permanent tie-down installations—and dynamic duty, where cyclic loading and vibration demand superior rigidity. Ten plates per pack allow flexibility in multi-point installation, backup sets for maintenance, or distributed tie-down networks across a vehicle platform.

Mechanics and fabricators commonly use D-Ring backing plates when retrofitting anchor points to truck beds, trailer frames, and cargo securement systems where a single D-ring would otherwise pull through thin sheet metal or composite panels. The backing plate spreads load over a larger footprint, preventing stress concentration and premature failure at the bolt hole. Installation is straightforward: position the plate on the interior or concealed side of the mounting surface, align bolt holes, and torque fasteners to specification. These plates work seamlessly with standard trailer D-rings and are compatible with most tie-down, cargo control, and recovery-point applications across light-duty, medium-duty, and heavy-duty vehicle platforms.