Out of stock
SKU: MIC250923
UPC: 787025491845
MPN: 250923
The Mickey Thompson 26x4-17 ET Drag Front Tire is a dedicated front runner built for drag cars, dragsters, and land speed vehicles that need low rolling resistance up front while the rear slicks do the work. Sized at 26 inches tall and 4 inches wide on a 17-inch wheel, this front tire is the light-end complement to Mickey Thompson's ET Drag drive tires. Racers running a 17-inch front setup will recognize the 26x4x17 spec as the go-to size for reducing weight and drag off the launch. It carries a white letter sidewall and MPN 250923.
This is a bias-ply, tubeless design, which keeps the sidewall predictable through the launch and holds shape at speed. The ultra-lightweight construction is the point here: less rotating mass on the front axle means less rolling resistance and quicker sixty-foot numbers. Mickey Thompson rates the tire as acceptable for high-speed use, so it holds up on land speed and top-end passes as well as bracket work. The solid white letters give it the classic ET Drag look that matches the rest of the lineup. At roughly 12 pounds, it is one of the lighter front runners you can bolt to a 17-inch front wheel, and it mounts tubeless on a standard drag front wheel.
Run this front tire when you're building a matched Mickey Thompson package and want the front end as light as the class allows. It pairs directly with the brand's ET Drag rear slicks to complete a race setup, so most buyers grab it alongside their drag tires and tubes and a set of drag front wheels. If you're speccing a full corner-to-corner build, browse the rest of our wheels and tires for mud covers, valve stems, and beadlock hardware. Reach out if you need help matching this front runner to a specific rear tire diameter and gear.
It describes a tire that stands 26 inches tall, has a 4.0-inch section width, and mounts on a 17-inch wheel. TireSize data lists this size with a circumference near 81.6 inches. It's a narrow, tall front runner sized to keep the front of a drag vehicle light.
This is a front tire, also called a front runner. It's built to reduce rolling resistance on the front axle and is meant to be paired with Mickey Thompson ET Drag rear drive tires. Do not run it as a drive tire.
No. This ET Front is a tubeless, bias-ply design and mounts without a tube on a standard drag front wheel. It carries a solid white letter sidewall to match the rest of the ET Drag line.
Mickey Thompson rates the ET Front as acceptable for high-speed use, which is why it's used on land speed and top-end applications as well as bracket racing. The lightweight bias-ply construction keeps it stable through the launch and down track.
It's designed to complete a race package with Mickey Thompson ET Drag rear slicks. The right rear diameter depends on your gearing and class, so match the rear to your target trap speed and available wheel size.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
