This Carver by Covercraft Performance Poly-Guard cover (MPN 70020P-10) is a Styled-to-Fit semi-custom cover built for 20.5' V-hull center console fishing boats with high bow rails. It fits a centerline length up to 20' 6", a maximum beam of 102", and a console height up to 54" above deck. Outboard owners get a motor cover sewn directly into the pattern, so the powerhead stays protected without a separate piece. The grey 8 oz marine-grade polyester is cut to follow the lines of a high-bow center console hull rather than draping loose like a universal cover, which means a tighter fit during travel, mooring, and storage.
The fabric is 100% marine-grade polyester finished with the Performance Poly-Guard treatment at 8 oz per square yard, rated for high tear strength along with UV and mildew resistance. It is extremely water repellent but stays breathable, so trapped interior moisture can escape instead of feeding mildew. A 1/4" shock cord is encased in the hem to pull the cover snug around the gunwale and resist wind lift on the trailer. Construction details carry through the whole cover: folded four-ply seams with no raw edges, double-stitch construction, and anti-wick thread throughout to keep water from migrating through the needle holes. Carver builds these covers in South Carolina and backs the fabric with a 5-year limited warranty.
Reach for this cover when you trailer a center console between ramps, leave the boat on a mooring, or park it for the off-season. The sewn-in motor cover and shock-cord hem make it practical for highway speeds, while the breathable fabric earns its keep during long storage. Pair it with a support pole or cover support kit to shed standing water, and look through our other boat covers and broader winterizing supplies if you are prepping a rig for layup. For console-specific protection on smaller hulls, check the universal center console covers in the same lineup.
| Specification |
Detail |
| Brand | Carver by Covercraft |
| Model/MPN | 70020P-10 |
| SKU | CW81758 |
| UPC | 813095028459 |
| Shipping Weight | 16.3 lbs |
| Centerline Length | 20' 6" |
| Max Beam | 102" |
| Max Rail Height | 18" |
| Console Accommodation | Up to 54" above deck |
| Material | 100% marine-grade polyester, Performance Poly-Guard, 8 oz |
| Color | Grey |
| Fit Type | Styled-to-Fit (semi-custom) |
| Compatibility | V-hull center console fishing boats with high bow rails and outboard motors |
| Intended Use | Travel, mooring, and storage |
| Warranty | 5-year limited |
| Country of Origin | Made in South Carolina, USA |
Frequently Asked Questions
Will this cover fit a center console boat with an outboard motor?
Yes. The motor cover is sewn directly into the pattern on this outboard model, so the powerhead is protected without a separate piece. The cover is sized for V-hull center console fishing boats up to 20' 6" centerline length with a maximum beam of 102" and high bow rails.
What is the cover made from?
It uses 100% marine-grade polyester finished with Performance Poly-Guard at 8 oz per square yard. The fabric is UV and mildew resistant, extremely water repellent, and breathable so interior moisture can escape. Folded four-ply seams, double-stitch construction, and anti-wick thread run throughout.
How does the cover stay on during trailering?
A 1/4" shock cord is encased in the hem and pulls the cover snug around the gunwale, which helps resist wind lift at highway speed. For travel and storage, many owners add cinch straps and a support pole to keep water from pooling on top.
Can it accommodate a tall center console?
This cover is cut to accommodate a console height up to 54" above deck, which suits most high-bow center console fishing hulls in the 20.5' range. Measure your console height and overall length against the listed dimensions before ordering.
Is there a warranty?
Carver by Covercraft backs the fabric with a 5-year limited warranty. The covers are made in South Carolina, USA. Keep your purchase records in case you need to file a claim against the fabric coverage.
