-12AN 90 Degree Hose End High Flow For PTFE Hose

The -12AN 90 Degree Hose End High Flow for PTFE Hose from VIBRANT PERFORMANCE is purpose-built for builders and mechanics who demand reliable hydraulic line connections in high-flow fuel, coolant, and transmission applications. This AN fitting serves as a critical junction point in custom fuel systems, intercooler setups, and turbocharger plumbing where space constraints or manifold geometry require a 90-degree directional change. Whether you're fabricating a race-spec fuel system, upgrading to larger displacement injectors, or installing a modern turbocharger on a classic platform, this hose end delivers the pressure rating and flow capacity needed to handle modern performance demands without bottlenecking your system.

Engineered for use with PTFE (polytetrafluoroethylene) braided hose, this fitting features a 90-degree elbow design that eliminates the need for bent hard lines or multiple straight adapters, reducing leak points and simplifying plumbing layouts. The -12AN sizing (3/4-inch nominal) provides ample flow cross-section for fuel delivery rates exceeding 120+ gallons per hour, making it ideal for turbocharged four-cylinders, supercharged V8s, and other high-output engines. VIBRANT PERFORMANCE's anodized aluminum construction resists corrosion and heat cycling while maintaining tight tolerances; the hose end features a swaged or compression-style seat that locks onto PTFE hose without thread galling or ferrule slip under vibration and pressure cycles.

Install this fitting wherever your fuel, coolant, or transmission line must turn 90 degrees without hard-line bends—manifold outlets, firewall penetrations, engine bay brackets, and intercooler cores. Compatible with any PTFE braided hose of matching -12AN diameter, it pairs seamlessly with fuel pumps, carburetors, EFI fuel rails, turbo feed lines, and transmission coolers. Proper hose assembly requires a hose crimper and AN-spec ferrules to ensure leak-free performance; refer to VIBRANT PERFORMANCE documentation for hose ID and ferrule specifications. Suitable for street, strip, and road-course vehicles operating at fuel pressures up to 100+ PSI.