SKU: RHP1220-08-2
UPC: 848487013980
MPN: 1220-08-2
This 8AN 120 Degree PTFE Reusable Hose End from REDHORSE PERFORMANCE is a female swivel fitting built for plumbers and fabricators routing high-pressure fuel and fluid lines in tight spaces. The 120-degree bend solves clearance problems that straight or shallow-angle fittings can't, letting you run PTFE hose past brackets, chassis rails, and engine components without kinking the line. It's designed for 302 and 303 series PTFE hose only, which makes it a purpose-built choice for racing fuel systems, brake circuits, and other applications where chemical compatibility and pressure rating matter more than convenience. The reusable swivel seal design also means you can disassemble and re-clock the fitting during a build.
The body is CNC machine-cut from 6061 T-6 aluminum and finished with a color-consistent black anodized coating, then hand-polished for clean threads and smooth assembly. Double Viton O-ring swivel seals are the core of the design, providing leak-free performance across a wide range of racing fuels and fluids while still allowing the hose end to rotate during installation. Because it's a reusable fitting, the ferrule is replaceable and sold separately, so a fitting can be reclaimed if you change hose lengths or rework a circuit. This is a 1200 Series swivel seal fitting, sized at 8 AN with a 120-degree angle. It is not compatible with standard braided racing hose or push-lock hose, so pairing it with the correct PTFE line is critical for a proper seal.
Reach for this hose end when you're building a custom fuel feed, return line, or high-pressure fluid circuit and the routing demands a hard 120-degree turn. It pairs directly with 8AN PTFE hose and works alongside unions, plugs, and adapters from the same family of components. If you're assembling a complete circuit, browse our full fittings, hoses, and valves selection, match it with the right 8AN PTFE hose, and stock the supporting swivel fittings you'll need to finish the run cleanly.
This hose end is built for PTFE 302 and 303 series hose only. It is not compatible with standard braided racing hose or push-lock hose. Using the correct PTFE line is required for the double Viton O-ring seals to function and prevent leaks under pressure.
Yes. The swivel seal design lets you disassemble and reuse the fitting during a build or when reworking a circuit. The ferrule is replaceable and sold separately, so the fitting can be reclaimed if you change hose lengths or re-route a line.
It's CNC machine-cut from 6061 T-6 aluminum and finished with a color-consistent black anodized coating. The piece is hand-polished for clean thread engagement and smooth assembly, and the double Viton O-ring seals handle a wide range of racing fuels and fluids.
The 120-degree bend clears obstructions that straight or shallow-angle fittings can't manage. It lets you route PTFE hose around brackets, chassis rails, and engine components without kinking the line, which keeps flow consistent in tight engine bays and custom fuel systems.
Replacement ferrules are sold separately. Because this is a reusable swivel seal fitting, you can rebuild it with a fresh ferrule when changing hose lengths or reassembling a circuit during a project.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
