SKU: VIB29906
UPC: 690092171940
MPN: 29906
The Vibrant Performance 90 Degree Swivel Hose Fitting in -8AN to -10AN is a reducing adapter built for plumbing layouts that need a hard turn without binding the line. It pairs a -8AN swivel end with a -10AN port, letting builders step between sizes while clearing a 90 degree corner in one part. This 10AN 90 degree fitting suits fuel, oil, coolant, and breather routing where a straight run won't fit into a pump boss, manifold, or filter housing. It belongs in any serious fittings, hoses and valves build where space is the limiting factor.
The swivel design is the point of this fitting. The -8AN end rotates on a sealed swivel so the line can be clocked to the exact angle the engine bay demands, then the nut is tightened without twisting the hose or chasing thread alignment. That swivel action stops the common headache of a fixed elbow that locks at the wrong rotation and forces you to back it off and reseat. The -10AN side mates to standard 37 degree AN flare hardware, so it drops into existing layouts running braided or PTFE line. Builders working a mixed system can keep the same fitting family across the build by pulling matched components from our swivel fittings and adapter fittings selection.
Reach for this fitting when a pump inlet, regulator, or cooler port sits at an awkward angle and a straight hose end would kink or crowd nearby components. The size step from -8AN to -10AN handles transitions between a smaller feed line and a larger return or main run without stacking extra adapters. It's a common pick on fuel systems, oil coolers, and turbo drain plumbing. Match it with the right length of braided or PTFE line from our hose offerings to finish the run clean.
It identifies a reducing connection. One end is sized for -8AN hardware and the other for -10AN, letting you step between the two line sizes in a single 90 degree turn instead of stacking a separate reducer and elbow.
The swivel end rotates so you can clock the hose to the exact angle you need, then tighten without twisting the line or fighting thread alignment. A fixed elbow locks at one rotation and often has to be backed off and reseated to point correctly.
The -10AN side mates to standard 37 degree AN flare fittings, so it works with common braided and PTFE line setups and existing AN plumbing. The -8AN swivel end accepts -8AN hose ends and adapters from the same family.
It's used in fuel, oil, coolant, and breather plumbing where a line has to make a hard 90 degree turn into a pump, regulator, cooler, or manifold port and a straight hose end would kink or crowd surrounding parts.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
