SKU: WIL341-15170
UPC: 889545075236
MPN: 341-15170
The Wilwood 341-15170 is a complete swing mount clutch pedal kit built for hot rod, race, and custom builds that need a hydraulic clutch actuation setup from scratch. It ships with a forged aluminum adjustable pedal running a 7:1 ratio, a 3/4 inch bore master cylinder with integral reservoir, and a universal pull-type slave cylinder. The swing mount design faces forward and bolts above the floor, which suits firewall-mounted applications where a floor-mount assembly won't work. Builders running manual transmission swaps or fabricating a custom pedal assembly will find this kit covers the hydraulic side in one box.
WILWOOD forges the pedal arm rather than stamping it, giving the assembly the strength to handle repeated high-effort clutch engagement without flex. The 7:1 pedal ratio multiplies driver input to drive the 3/4 inch bore master cylinder, which carries an integral reservoir so there's no separate remote tank to plumb. Fluid travels to the universal pull-type slave cylinder, letting you adapt the kit to a wide range of bellhousing and release fork arrangements. The pedal arm and bracketry wear a black paint finish, and the swing mount sits forward of the driver for clearance in tight footwell layouts. Overall length runs 12.10 inches, and the kit weighs in around 4.86 lbs per published specifications.
Reach for the 341-15170 when you're converting a cable clutch to hydraulic, building a chassis without factory pedal provisions, or replacing a worn swing mount assembly under the dash. The forward-facing layout works well in firewall-mount installs where space behind the pedal box is limited. Because the slave cylinder is universal, it adapts across many transmission and bellhousing combinations rather than locking you into one application. Pair it with a matching clutch pedal or a complementary gas pedal to finish the footwell. Browse our full interior and accessories selection for related fabrication hardware.
The kit includes a forged aluminum swing mount adjustable clutch pedal with a 7:1 ratio, a 3/4 inch bore master cylinder with integral reservoir, and a universal pull-type slave cylinder. It's a complete assembly meant to handle the hydraulic clutch side of a build in one package.
The swing mount pedal hangs from a bracket above the floor and faces forward, which fits firewall-mounted pedal box installs. A floor mount assembly bolts to the floor pan instead. Choose swing mount when your build has provisions above the footwell rather than through the floor.
The pedal runs a 7:1 ratio, meaning driver input is multiplied seven times before reaching the master cylinder. Combined with the 3/4 inch bore master cylinder, that ratio sets the clutch pedal effort and travel for the assembly.
The pull-type slave cylinder is universal, so it adapts to a wide range of bellhousing and release fork setups rather than being application-specific. Confirm your fork geometry and travel requirements against the slave cylinder's specifications before installation.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
