JL Audio AP600/6 Amplifier 600 Watt 6 Channel

Shop All Products From JL Audio

Options

$629.99
Or
  • Secure checkout
  • Free shipping $500+
  • 60-day returns
Not sure it fits? Ask our AI compatibility expert

Info

SKU:JLA0100343000 ,UPC:

SKU: JLA0100343000

UPC: 729218924532

Info

SKU:
JLA0100343000
UPC:
729218924532

Description

JL Audio AP600/6 Amplifier 600 Watt 6 Channel

Model: 010-03430-00
  • 600-WATT 6 CHANNEL AMPLIFIER: This staggered-power 6 channel amplifier can power up to a maximum of six pairs of speakers or four pairs of speakers and one subwoofer.
  • EASY TUNE FEATURE: For additional optimization, pair with a Fusion(R) stereo with built-in DSP, and download the Fusion(R) Audio app for selectable profiles. This enables the Easy Tune feature, which streamlines amplifier setup to ensure superior sound quality and system protection.
  • CLASS-D AMPLIFIER TECHNOLOGY: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
  • RUGGED DESIGN: These amplifiers offer superior levels of durability and are built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specifications
General
Channels6
Physical dimensions (Height)1.86in (47 mm)
Physical dimensions (Width)11.81in (300 mm)
Physical dimensions (Depth)5.90in (150 mm)
Operating voltage9-16 VDC
Water and dust ratingIP67
Operating temperature range4 deg to 149 deg F (-20 deg to 65 deg C)
Warranty3 years
Audio
Amplifier classClass D
Rated continuous (RMS) power (14.4 V input @ 4 Ohm less than 1% THD)Channels 1-4: 50 W x 4/150 W x 2 (Bridged); Channels 5-6: 100 W x 2/300 x 1 (Bridged)
Rated continuous (RMS) power (14.4 V input @ 2 Ohm less than 1% THD)Channels 1-4: 75 W x 4; Channels 5-6: 150 W x 2
Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog InputsGreater than 70 dB
Frequency response (+0, -1dB)20 Hz-20 kHz
Input sensitivity @ RCA inputsSwitchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
Current consumption (Standby)Less than 1mA
Current consumption (Idle)1000mA-1500mA
Fuse rating70A
Recommended fuse type(s)AFS, AGU or MaxiFuse
Min. copper power/Ground wire gauge4 AWG wire
Protection circuitsInput under/over voltage Over temperature Output short circuit

What's in the Box:
  • JL Audio AP amplifier
  • Four mounting screws
  • Documentation

WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.