10AN ProSeries 200 Double Braided Hose 3ft

The 10AN ProSeries 200 Double Braided Hose 3ft from REDHORSE PERFORMANCE is engineered for high-flow fuel, coolant, and hydraulic applications in modified and performance vehicles. Whether you're building a custom fuel system, upgrading engine cooling circuits, or fabricating a custom brake line configuration, this 3-foot hose segment delivers the reliability and flow capacity required for serious automotive work. The 10AN size (5/8-inch nominal diameter) sits in the sweet spot between compact chassis constraints and adequate volumetric flow, making it ideal for street rods, turbocharged engines, and race-prepped vehicles where space and performance both matter.

Double braided construction on the 10AN ProSeries 200 hose provides two critical advantages: the inner braid resists ballooning under pressure spikes, while the outer braid offers abrasion protection and structural integrity during engine vibration and thermal cycling. The synthetic rubber core maintains flexibility across wide temperature ranges—essential for fuel systems exposed to engine heat or coolant loops running near boiling point. The 200 series rating indicates this hose is rated for sustained operating pressures in the 200+ PSI range, suitable for mechanical fuel pumps, electric lift pumps, and pressurized cooling systems. Stainless steel AN fittings (sold separately) crimp securely onto the hose ends, allowing you to configure custom lengths and routing without welding or permanent bends.

Mechanics and fabricators favor the 10AN ProSeries 200 hose for engine bay work where tight routing and thermal exposure demand durability. The 3-foot segment allows single-run installation between fuel tanks and carburetors, between radiators and water pumps, or for gravity-feed brake lines in hot rod applications. Installation requires standard AN crimp fittings and a proper hose crimping tool—do not attempt reusable push-lock fittings on braided hose. Route the hose away from exhaust manifolds and sharp chassis edges; the double braid resists abrasion but benefits from protective sleeving in high-vibration zones. This hose is compatible with gasoline, synthetic fuels, most coolants, and DOT brake fluid, making it versatile for fuel, cooling, and hydraulic applications across street, strip, and road course builds.