SKU: RHP822-12-16-2
UPC: 810465013527
MPN: 822-12-16-2
The REDHORSE PERFORMANCE 12AN 90Deg Male Adapter to 1in Male Black connects two common port standards found in aftermarket fuel systems, oil lines, and hydraulic applications. This 90-degree fitting transitions between -12 AN flare connections and 1-inch pipe thread ports, solving routing challenges where straight adapters would create awkward angles or interfere with nearby components. Builders working on fuel injection upgrades, turbo oil feed lines, or fuel cell installations will find this adapter essential when plumbing runs require direction changes at the connection point rather than mid-line.
REDHORSE machines their 822 Series adapters from 6061 T-6 aluminum using CNC turning centers, producing threads and sealing surfaces with the precision required for leak-free fuel and oil system connections. The black anodized finish provides corrosion resistance while matching most engine bay aesthetics. At the -12 AN end, the 37-degree flare seat accepts standard AN fittings and braided hose ends. The 1-inch pipe thread end uses tapered threads that seal with thread sealant or tape. This angled configuration routes hoses away from headers, intake manifolds, or chassis rails where straight connections would create kinks or clearance problems.
This adapter fits applications ranging from street-driven muscle cars to dedicated track builds. Use it to connect a fuel pressure regulator with pipe thread ports to AN braided lines, or route oil supply from a dry sump tank to a remote filter housing. The 90-degree angle often eliminates the need for additional fittings that add potential leak points. Pair this adapter with compatible AN hose ends and braided line from our parts and accessories selection to complete your custom fluid system build.
| Specification | Detail |
|---|---|
| Brand | REDHORSE PERFORMANCE |
| Model/MPN | 822-12-16-2 |
| SKU | RHP822-12-16-2 |
| UPC | 810465013527 |
| Shipping Weight | 0.29 lbs |
| Type | 90 Degree AN to Pipe Thread Male Adapter |
| AN Size | -12 AN Male |
| Pipe Thread Size | 1 inch Male |
| Material | 6061 T-6 Aluminum |
| Finish | Black Anodized |
| Configuration | 90 Degree (Angled) |
The -12 AN side uses a 37-degree flare seat with straight threads that seal at the flare contact point. The 1-inch pipe thread side has tapered threads that create a seal as they tighten into the mating port. The AN connection requires no sealant while the pipe thread end needs thread tape or liquid sealant.
Yes, REDHORSE 822 Series fittings are designed for fuel systems, oil lines, and hydraulic applications. The 6061 T-6 aluminum construction and anodized finish resist corrosion from common automotive fluids including gasoline, ethanol blends, and motor oil.
A 90-degree adapter allows the hose to exit perpendicular to the port, useful when straight runs would cause interference with engine components or create tight bends in the hose. This reduces the total fitting count and eliminates potential leak points from additional couplers.
Use fuel-resistant thread sealant or PTFE tape rated for your specific fluid application. For gasoline and ethanol fuel systems, ensure the sealant is compatible with those fuels. Apply sealant only to the pipe thread end—never use sealant on AN flare connections.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
