SKU: VIB11948
UPC: 690092161880
MPN: 11948
The 50ft Roll Stainless Braided Flex Hose -8AN from VIBRANT PERFORMANCE is bulk plumbing stock for builders running custom fuel, oil, coolant, and methanol lines. This is the 8 g flex series stainless braided hose sized at -8 AN with a 0.44-inch inner diameter, sold as a single 50-foot roll so fabricators can cut runs to length instead of buying fixed assemblies. It suits engine builders, race teams, and anyone routing fluid lines on a high-output build. Pair it with the right hose ends and fittings from our fittings, hoses, and valves selection to finish the job.
Construction is a reinforced synthetic rubber inner liner wrapped in a braided stainless steel exterior, which protects the line from abrasion and chafing in tight engine bays. Per published specifications, the hose carries a 500 psi pressure rating and a working temperature range of -40°F to 300°F. The synthetic liner handles oil, water, fuel, coolant, methanol, and vacuum service, and it is rated E85 compatible, which matters for anyone running alcohol blends. It is not built for brake lines or hydraulic pressure lines. The 0.44-inch inner diameter of the -8 AN size moves enough volume for return-style fuel systems and oil cooler plumbing. VIBRANT PERFORMANCE backs the hose with a one-year limited warranty.
Builders reach for a 50-foot roll when a project needs multiple runs and consistent hose stock across the whole system. Cut your lengths, attach reusable -8 AN hose ends, and you have clean fuel feed, return, oil cooler, or coolant routing without splices. The braided jacket also takes the heat and vibration of a working engine compartment. To complete the assembly, look at our -8 straight hose ends and the broader AN fitting range for adapters, unions, and tees that match this size.
The -8 AN size carries a 0.44-inch inner diameter, per published specifications. That bore moves enough volume for return-style fuel systems, oil cooler lines, and coolant routing on most high-output builds.
Yes. The reinforced synthetic rubber inner liner is rated for fuel including E85, along with oil, water, coolant, methanol, and vacuum service. That makes it a flexible choice for builds running alcohol blends.
No. This hose is not built for brake lines or hydraulic pressure lines. Use it for fuel, oil, coolant, methanol, and vacuum service only. We stock dedicated brake line products separately for braking systems.
The hose is rated to 500 psi with a working temperature range of -40°F to 300°F, per published specifications. The braided stainless exterior also protects the line against abrasion in tight engine compartments.
Each order is a single 50-foot roll of bulk stock. You cut runs to length and attach -8 AN hose ends, which lets you plumb multiple lines from one consistent supply of hose.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
