SKU: VIB10736
UPC: 690092156442
MPN: 10736
The Vibrant Performance 10736 is a -16AN female 90-degree union adapter built to connect two -16AN female ports at a fixed right angle. Anyone routing large-bore oil, fuel, or coolant lines in a performance build runs into tight clearances where a straight fitting simply won't work, and that's where a 90 coupler in -16AN female tube configuration earns its place. This piece lets builders make a clean turn between hose ends inside a crowded engine bay or behind a custom manifold without kinking the line or forcing the hose into a stress radius it wasn't meant to take.
It is machined from 6061 aluminum alloy and finished in anodized black, per the available product specifications. The 6061 alloy keeps the part light while holding thread integrity under repeated assembly, and the black anodize resists corrosion and surface scuffing in a wet engine bay. Both ends carry female -16AN threads, so the adapter mates directly to male AN hose ends or straight fittings on either side. The -16AN size is among the larger AN sizes, suited to high-volume fuel return lines, dry-sump scavenge plumbing, and oil cooler feeds where flow matters. Pair it with matching -16AN hose ends and braided line to complete the run. The fixed 90-degree geometry removes the guesswork of bending a hose to clear an obstacle.
Reach for this adapter when a line has to change direction in a confined space and you want a sealed, serviceable AN joint rather than a hard bend. It is a common solution in fuel system, transmission cooler, and dry-sump plumbing where -16AN flow capacity is required. Because both ports are female, it bridges two male hose ends or unions in series, which is useful when you need to flip the angle mid-run. Browse our full selection of AN adapters and -16AN unions to match the rest of your system, along with the fittings, hoses, and valves category for hose, clamps, and sealing hardware.
It joins two -16AN female ports at a 90-degree angle. Both ends carry female AN threads, so the adapter mates to male -16AN hose ends or straight fittings on either side. It is used to make a right-angle turn between two hose runs without bending or kinking the line.
Per the available product specifications, the 10736 is machined from 6061 aluminum alloy with an anodized black finish. The alloy keeps weight down while maintaining thread strength through repeated assembly, and the anodized coating helps resist corrosion and scuffing in a wet engine bay.
It suits high-volume plumbing such as fuel return lines, dry-sump scavenge lines, and oil cooler feeds where -16AN flow is needed. The fixed 90-degree geometry is most useful in tight engine bays or behind custom manifolds where a straight fitting cannot clear an obstacle.
No. The 10736 is the union adapter only. You will need matching -16AN male hose ends, braided line, and any sealing hardware separately. We stock -16AN hose ends, unions, and hose in our fittings category to complete the run.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
