SKU: VIB16887
UPC: 690092159351
MPN: 16887
The Vibrant Performance Quick Disconnect EFI Adapter Fitting -8AN (MPN 16887) bridges a factory quick-disconnect line and a -8AN braided or push-lock system. It carries a -8 AN male flare on one end with a 3/8 inch hose-size quick-connect on the other, which makes it a direct answer for builders searching for an EFI quick-disconnect-to-AN adapter on the fuel feed or return side. Anyone converting a stock fuel rail, pump outlet, or filter over to AN plumbing will find this is the piece that ties the two standards together without cutting and crimping new hard line.
It is machined from 6061 aluminum alloy and finished in black anodize, which keeps weight down to roughly 0.06 lbs while standing up to gasoline and alcohol fuels. The quick-disconnect side mates to standard 3/8 inch fuel-system couplers found on pumps, filters, and oil components, while the -8 AN male flare threads into any compatible swivel hose ends or unions. The seal design is built to resist leaks under fuel pressure, and the flow path is sized to match the -8 AN bore so it does not choke volume. Package dimensions run 1.90 inches by 0.90 inches by 0.90 inches, and it ships with a one-year limited warranty per the manufacturer. Assembly is straightforward with standard AN wrenches.
Reach for this adapter when a fuel build keeps the factory quick-connect on one component but moves everything downstream to AN hose. It pairs well with a -8 AN feed line running from the tank to a regulator or rail, and works alongside matching -8 union fittings and straight hose ends when you plan a full system. Browse the rest of our fittings, hoses, and valves to round out a fuel plumbing setup, from caps and plugs to braided line. If you are mixing AN sizes across a build, check the union and hose-end options before you order.
It joins a 3/8 inch quick-disconnect fuel coupler on one side to a -8 AN male flare on the other. That lets you keep a factory-style quick-connect on a pump, filter, or rail while transitioning the rest of the line to AN hose and fittings.
Yes. The 6061 aluminum body with black anodized finish is rated for both gasoline and alcohol fuels, which makes it suitable for pump gas, race gas, and methanol or ethanol-blended fuel systems.
The flare side is -8 AN male, so it threads into any -8 AN female swivel hose end or union. Match it to -8 AN braided or push-lock hose to keep the bore consistent through the fuel system.
It is machined from 6061 aluminum alloy with a black anodized finish and weighs about 0.06 lbs. The lightweight build keeps mass off the fuel system while resisting corrosion from fuel contact.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
