Ring Terminal 3/8in 8-10 Ga w/Heat Shrink 50pk

Options

$53.34
MSRP: $56.95
You save $3.61
Or

Trusted By Over 250,000+ Happy Customers Serving outdoor enthusiasts nationwide

Info

SKU:QRP57-474-50 ,UPC:

SKU: QRP57-474-50

UPC: 810165041462

MPN: 57-474-50

Info

SKU:
QRP57-474-50
UPC:
810165041462
MPN:
57-474-50

Description

The Ring Terminal 3/8in 8-10 Ga with Heat Shrink (50-pack) is a marine-grade electrical connector engineered for reliable deck wiring, trolling motor installations, and battery bank systems on modern fishing and recreational boats. Whether you're upgrading an aging electrical harness, retrofitting a new console, or securing permanent connections on a center console or pontoon, these ring terminals provide the mechanical and thermal integrity that separates professional-grade installations from field repairs. The 50-unit quantity makes this ideal for boaters who maintain multiple circuits or tackle larger rewiring projects without frequent reordering.

Each ring terminal features a 3/8-inch stud hole diameter and accommodates 8–10 gauge wire—the sweet spot for 12-volt and 24-volt marine circuits where both amperage capacity and vibration resistance are critical. The integrated heat shrink sleeve seals the wire-to-barrel crimp joint, blocking salt spray, moisture, and corrosion that would otherwise degrade bare solder or mechanical-only connections over seasons on the water. Constructed to QUICKCAR Racing Products standards, these terminals deliver consistent barrel dimensions and plating that ensure proper current flow and mechanical pull-out strength, even under the shock loads of engine startup or emergency trolling conditions.

Experienced boaters and marine electricians rely on ring terminals for securing battery cables to main distribution panels, attaching ground straps to engine blocks, and creating permanent tap points for auxiliary circuits such as fish finders, radios, and spotlight systems. Install these connectors using a proper crimper tool rated for 8–10 gauge wire, then slide the heat shrink up over the crimped barrel and apply moderate heat to seal the joint completely. The 3/8-inch hole mates directly with standard marine bus bars, battery terminals, and switch studs found on most production and custom electrical systems, ensuring compatibility across salt and freshwater platforms alike.

SpecificationDetail
Brand
QUICKCAR RACING PRODUCTS
MPN / Part Number
57-474-50
UPC
810165041462
SKU
QRP57-474-50
Weight
0.34 lbs
Dimensions
6 x 1.5 x 6 in
Stud Hole Diameter
3/8 inch
Wire Gauge Range
8–10 AWG
Insulation Type
Heat Shrink Sleeve
Quantity per Package
50 Pieces
Application
Marine electrical, 12V/24V systems
Installation Method
Crimp tool with heat shrink activation

WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.