TRAC Outdoors Bilge Pump - 800/1100 GPH - Non-Automatic

The TRAC Outdoors Bilge Pump 800/1100 GPH Non-Automatic (Model 69301) is a self-priming, 12-volt centrifugal pump engineered for reliable water removal across all watercraft types. Whether you're running a center console offshore, maintaining a cruising sailboat, or keeping a weekend fishing boat dry, this pump delivers consistent performance when bilge water accumulation threatens vessel safety. The cartridge-style pump head and universal strainer base eliminate guesswork during installation, making retrofitting straightforward on boats previously equipped with Attwood Tsunami, Rule, or Johnson/Mayfair pumps.

The 800/1100 GPH dual-rating reflects real-world operating conditions: 800 gallons per hour at maximum head pressure and 1100 GPH at minimal resistance, so actual output depends on discharge hose length, diameter, and any through-hull fittings. Self-priming capability means the pump re-establishes suction after running dry—a critical feature when bilge levels drop or when winterizing equipment. The universal strainer base accepts standard Rule and Attwood cartridge pump heads, giving you flexibility to upgrade or replace individual components without replacing the entire assembly. Screw-mount holes align with Rule and Attwood installations, speeding up deck work and minimizing fabrication.

This manual bilge pump suits captains who prefer manual control over automatic operation, or who use it as a backup system alongside an automatic primary pump. Non-automatic pumps require manual activation—via switch or remote panel—giving operators direct command over when water exits the bilge. Common applications include backup pumping on larger vessels, emergency dewatering, and systems where automatic float switches have proven unreliable. The 0.85-pound compact footprint (7 x 4 x 8 inches) fits tight engine compartments and locker installations without monopolizing valuable space.

Centrifugal pump design tolerates debris and sediment better than some gear-pump alternatives, making it well-suited for seawater bilges where salt crystallization and fine sediment are routine. Verify discharge hose ID (inner diameter) against the pump outlet before ordering; undersized hose dramatically cuts actual output and increases motor strain. Plan discharge routing to exit above the waterline with a through-hull valve or siphon-break to prevent backfill when the pump stops.