SKU: FRG482219-BL
UPC: 822320017359
MPN: 482219-BL
The FRAGOLA 12an to 1in Mpt 90-Deg. Adapter Fitting in black converts a -12 AN hose connection to a 1-inch male pipe thread port, turning a tight clearance situation into a clean routing path. Builders reach for this adapter when a hose has to leave a threaded port at a hard angle, common in turbo fuel feeds, oil cooler plumbing, and coolant circuits. Machined from aerospace-quality aluminum, it carries the FRAGOLA reputation for sealing under pressure. You'll find it alongside the rest of our adapter fittings for performance plumbing work.
The 90-degree body lets a hose exit the port at a right angle, which keeps lines off headers, frame rails, and other hot or sharp obstructions without kinking the hose. The pipe thread side threads into 1-inch female ports on pumps, blocks, reservoirs, and manifolds, while the -12 AN side accepts a standard 37-degree AN hose end. FRAGOLA machines these from aerospace-quality aluminum and finishes them in black anodize for corrosion resistance and a uniform look across an engine bay. Similar FRAGOLA adapters in this family are rated to 250 PSI working pressure. The part number is 482219-BL, listed in the catalog under the -12 X 1 inch pipe thread group. Pair it with matching -12 hose ends for a complete run.
Use this adapter anywhere a large-bore fluid line meets a 1-inch threaded port and space won't allow a straight fitting, fuel systems feeding high-horsepower engines, transmission and oil coolers, or dry-sump and coolant returns. The right-angle design earns its place in cramped engine bays where a straight fitting would force the hose into a hard bend. Thread sealant or tape on the pipe thread side finishes the seal. Browse the full fittings, hoses, and valves selection to match this adapter with the hose and ends your build calls for.
It converts a -12 AN hose connection to a 1-inch male pipe thread port. The pipe thread side threads into a 1-inch female port on a pump, block, or reservoir, and the -12 AN side accepts a standard 37-degree AN hose end. The 90-degree body lets the hose exit at a right angle.
The right-angle body lets a hose leave a threaded port at 90 degrees without forcing a sharp bend in the hose itself. That keeps lines clear of headers, frame rails, and tight clearances in a crowded engine bay, and it reduces flow restriction compared to a kinked hose.
Specific pressure data for this exact SKU was not published in the accessible catalog, though similar FRAGOLA adapters in this family are rated to 250 PSI working pressure per manufacturer literature. Use thread sealant or tape on the pipe thread side to ensure a leak-free seal.
Yes on the pipe thread side. Pipe threads seal on the thread taper, so a thread sealant or tape rated for fuel and oil is recommended. The -12 AN side seals on its 37-degree flare and does not need sealant when mated to a matching AN hose end.
It is machined from aerospace-quality aluminum and finished in black anodize. The anodized coating resists corrosion and gives a uniform appearance that matches other black FRAGOLA fittings across a build.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
